If you’re finding that the sound is too quiet in your hearing aid, then we have good news. It may not be a serious problem. You may be able to use these simple troubleshooting steps to get your hearing aid working again properly without having to visit your hearing aid center to buy a new hearing aid. So, before you make an appointment, follow these steps for troubleshooting hearing aid issues when the sound is too quiet.

  1. Check for blockages and other debris.

Look over your hearing aid carefully to see if there’s anything that could be blocking the microphone, such as ear wax or other debris. If the microphone becomes fully or even partially blocked, it can make the sound too quiet, so this should be the first thing you check. Even the smallest amount of buildup can make a difference in the sound volume, which is why keeping your hearing aids clean is so important.

To clean your hearing aids, begin by using the soft-bristle brush that came with your hearing aid cleaning kit. Be sure to face the opening downward so anything you loosen falls out rather than further in. After that, you’ll need to use the wax hook or pick to carefully remove any leftover debris that the brush may have missed. Then, use a clean, dry cloth to clean the outside of the hearing aid.

  1. Inspect the Tubing

This step is only for those who have an earmold and tubing. If you do have one of these hearing aids, you’ll need to carefully check the tubing to see if there are any cracks in the tubing, or any blockages or moisture on the inside. These can all be the root of the problem if the sound is too quiet, so be sure to look over them carefully.

If you do see any blockages or moisture on the inside of your earmold hearing aid, then use a bulb blower to try to remove them. If you are having trouble removing blockages or moisture or you find that there are cracks in the tubing, you may need to replace the tubing. This is something that many people do themselves, whereas others prefer to leave it up to the professionals.

  1. Check the Volume Level

Although this may seem obvious, it’s something that many people may not think about, especially if they don’t need to adjust their hearing aids much throughout the day. However, one of the most common reasons the sound is too quiet in hearing aids is that the volume is turned down too low. So, if you have a volume control on your hearing aid, be sure to adjust it as part of your troubleshooting this hearing aid issue.

  1. Check the memory or program.

Many of the modern hearing aids now have different program settings that allow you to quickly switch between different programs to allow you to hear best in different situations. If you have a hearing aid that offers different program or memory options, check to make sure you have it set to the correct one. If you don’t have one of these hearing aids, then you can move on to the next step of the troubleshooting process.

  1. Visit Your Hearing Center

If you have going through this list of troubleshooting hearing aid issues and the sound is too quiet still, then you will have to pay a visit to your hearing center. They can help repair the hearing aid if that turns out to be the root of the problem, and if not, then they will likely want to test your hearing to see if there have been any changes since your last visit that may be causing the sound to be too quiet.